Tycon Systems UPS-ST2424-100-UBNT Installationsanleitung

UPS-ST2424-UBNT UPSPro™ Backup Power System ▫ Wireless Base Stations and Client Devices ▫ Surveillance Cameras ▫ Remote Sensors ▫ UBNT Equipmen

10 SPECIFICATIONS Subject to change without notice Power Rating 60W Reserve Power @ 30W Load 2 battery 20 hours 4 battery 40 hours B

11 Typical UPSPro-ST2424-UBNT Application

12 8000025 Rev 3 UPS-ST2424-UBNT UPSPro™ Qwik Install Guide Limited Warranty The UPSPro™ products are supplied with a limited 24 month war

2 Qwik Install STEP 1: Add Grounding Wire Between Door and Enclosure: Remove plastic covers on copper studs on inside of door and inside of enclosure

3 the pole mount kit to the back of the enclosure and mount the en-closure to a pole using the 6 hose clamps provided. The enclosure can also be wall

4 troller to the back green connector on the 5 port switch. You can use the included cable with terminal connectors by cutting off terminal con-necto

5 STEP 10: If batteries are installed on their side make sure to apply an insu-lator to the top of the battery terminal to pre-vent the ba

6 on the controller will become unplugged due to vibration and the weight of the cables. Be sure to add a zip tie or other method to hold the ca-bles

7 Note: The controller can supply 24V 1A from the POE OUT port and 24V 1.5A from the auxiliary wire terminal port. To utilize the full 60W you can co

8 Compatible Solar Panel Kits Tycon Power Systems Solar Panel kits come with High Performance solar panels, side of pole mounts and out-door rated co

9 Compatible Wind Turbine TPW-400DT-12/24 400W 12/24V Wind Turbine  Includes controller  Good low wind performance  Self braking in high wind